Epoxy BS 3000 SG

Epoxy BS 3000 SG

Water-based, pigmented, silk-gloss sealant

This product is not available to buy online. Please contact us for pricing and more information.

€ 159.90 EUR
Every effort has been made to ensure the accuracy of our digital colours and textures however due to limitations with technology, we strongly advise purchasing sample products for testing in situ prior to the full order being placed.
All prices specified on our website include VAT. Contact our team for bulk pricing and trade discounts.
No items found.

Delivery Information

Unless otherwise specified all products within Ireland should be delivered within 2-3 working days. Please contact us for delivery options outside of Ireland or if you wish to ship to Northern Ireland.

Our stock is primarily shipped by Fastway or via the pallet network depending on the total weight of the order. The delivery method will be automatically assigned and priced at checkout. All delivery prices include VAT.

Main Purpose


Field of application

  • Sealant in Remmers Water Vapour Diffusion-Open systems
  • Topcoat on Remmers Water Vapour Diffusion-Open blinded coatings
  • Topcoat in the system Remmers Deck OS 8 WD
  • System component in TÜV PROFICERT-product Interior certified systems (707106482-4, -5)


  • Silk gloss
  • Anti-slipping version possible
  • Water vapour diffusion capable
  • Contains no plasticisers, nonylphenols or alkylphenols
  • Physiologically harmless once fully cured

Product specifications

Solids content65% by mass

Component A

Density (20°C)1.5 g/cm³

Viscosity (25 °C)400 mPa s

Component B

Density (20°C)1.1 g/cm³

Viscosity (25 °C)200 mPa s


Density (20°C)1.4 g/cm³

Viscosity (25 °C)750 mPa s

The stated values represent typical product characteristics and are not to be construed as binding product specifications.


Substrate requirements

  • The substrate must be firm, dimensionally stable, capable of bearing loads and free of loose constituents, dust, oil, grease, rubber marks and other substances that could interfere with adhesion.
  • The substrate must be prepared using suitable Remmers Water Vapour Diffusion-Open products.
  • For OS 8 systems, please see the corresponding test certificate.
  • Combination container
  • Add the entire quantity of the hardener (component B) to the base compound (component A).
  • Mix thoroughly with a slow-speed electric mixer
    (approx. 300 - 400 rpm).
  • Pour the mixture into a separate container and mix again thoroughly.
  • Mix for at least 3 minutes.
  • Insufficient mixing is indicated by streaks forming.


Application temperature: min. 8 °C max. 30 °C
By brush / By roller
Pot life 30 min

Application requirements

  • Temperature of the material, air and substrate: from min. +8 °C to max. +30 °C
  • The times given are reduced at higher temperatures and increased at lower temperatures, in particular in combination with high humidity.

Working tools / cleaning

By brush / By roller
  • Notched trowel, smoothing trowel, paintbrush, epoxy roller and mixing apparatus
  • More detailed information can be found in the Remmers Tool Programme.
  • Clean tools, equipment and any splashed material immediately with water while still fresh.
  • Take suitable protective and waste disposal measures when cleaning.

Storage / shelf life

Store frost-free
Shelf-life 9 months
  • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 9 months.