Pro Clima Aerofixx is a unique solution for the rapid application of Aerosana Visconn and Visconn Fibre to a large range of surfaces. It uses convenient 600ml foil cartridges of Visconn Fibre or Aerosana Visconn liquid airtight membrane. The Aerofixx connects to an air compressor and can be used for both spraying and filling and sealing joints and gaps. It is ideal for quickly creating an airtight seal in areas where tape and membrane would be unsuitable, time-consuming, or difficult to apply.
Use Aerofixx where Aerosana Visconn and Visconn Fibre would be applied. It is especially convenient for sealing areas where tape or membrane is difficult, unsuitable or time consuming to apply. Aerofixx is compatible with 600ml foil cartridges.
Aerosana Visconn and Visconn Fibre can be applied to Smooth or rough brick, blockwork, stone, concrete, timber, metal brackets, wood-based boards, and panels.
Aerofixx should be connected to an air compressor. The minimum specification for the compressor is 300 litres per minute (air displacement) and 6 bar.
Pro Clima Aerofixx sprayer and sealant gun can be loaded with foil cartridges of Aerosana Visconn or Visconn Fibre. Once connected to an air compressor (set to 6 bar), it can extrude a bead of the material to fill wide gaps, then with the turn of a dial, can also spray the material over the top (and seal the surrounding area) to achieve an airtight seal extremely quickly.
Aerofixx is unique in the marketplace and the first tool capable of both spraying and filling of gaps and joints. The user can quickly swap from Aerosana Visconn to Visconn Fibre very easily to rapidly seal a huge range of difficult or tricky details in record time. The airflow rate and spray pattern can be adjusted to make it even more convenient for airtight detailing.
To use Pro Clima Aerofixx, users only need foil cartridges of Aerosana Visconn or Visconn Fibre and to connect the Aerofixx to an air compressor. It is therefore a cost-effective solution for airtightness installers (and skilled DIY enthusiasts) as no higher-cost airless sprayer machine and spray gun is required. The 600ml foil cartridges also allow for smaller areas to be sealed in a cost-effective way, allowing users to buy only as much Visconn material as they need instead of larger 5 or 10 litre buckets.
Aerofixx uses compressed air to activate an internal plunger to squeeze a foil tube of Aerosana Visconn or Visconn Fibre and expel it through an adjustable nozzle. The nozzle can be rotated to switch between spraying the Visconn material or slowly extruding a bead. The amount of material expelled and the width of the spray pattern can be varied by adjusting the nozzle and the air flow rate.
