Pro Clima Tescon Naideck is made of non-ageing, bitumen-free butyl rubber. Naideck’s butyl rubber creates a permanent high strength and durable bond that penetrates deep into the pores of membranes, fibreboards and timber surfaces. Sandwiched between the membrane and timber, fixings go through the batten, Naideck and membrane. Naideck seals the membrane puncture instantly and makes it impossible for water to seep in or air to leak.
Tescon Naideck nail sealing tape should be used where screwing or nailing through one piece of timber into another would penetrate an airtight or windtight membrane installed between the two. E.g. when a timber batten is to be secured to a roof covered with a membrane, the batten and membrane should have Tescon Naideck in-between to ensure the nails or screws will pass through the Naideck as they are driven into the roof timbers below.
Tescon Naideck creates a waterproof, air and windtight seal for holes in membranes created by screws and nails. It promotes extremely high levels of build quality by acting as an additional layer of weather protection around vulnerable fixing points. This is particularly beneficial in low pitch (less than 20° of slope) roof situations where fixing points are often a weakness in the construction.
Tescon Naideck is very easy to use. Its butyl rubber is the best material for waterproof sealing of vulnerable, and often hidden / hard to locate, penetrations made at fixing points.
The elastic nature of butyl rubber means that when nails or screws penetrate the tape it forms a bond and tight seal that moves with and surrounds the fixing.
