SkamoWall Adhesive is mixed with clean water using a mixing paddle set on a moderate speed until a smooth creamy consistency is achieved.
Leave to stand for 3 minutes. Apply using an 8mm notched trowel.
Typically applied directly to the wall, application to the back of the board is also possible to aid fixing where the adhesive is used to help ensure full contact on rougher surfaces. Open time 2 hours approx.
Full strength achieved after 6 hours.
Supplied as 20 Kg dry powder in a paper sack.
How to use:
It is important to clean off the wall from wallpaper, paint, dust, dirt, etc. before mounting SkamoWall boards.
Remove dust from the surfaces of SkamoWall Boards.
SkamoWall Adhesive is to be mixed 4.8 to 5.4L of pure water per 20kg bag:
SkamoWall Adhesive can be used for 1 to 1.5 hours after mixing. Extra water can be added if needed.
SkamoWall Adhesive is applied to the wall in a layer of maximum 15mm thickness with an 8 to 10mm notched trowel to achieve an even layer.
The SkamoWall Living Board is placed 5 to 10mm from the final position, the board is pushed in place to even out the SkamoWall Adhesive. It is important for the fully glue the SkamoWall Board.
Fill joints between SkamoWal Boards with SkamoWall Adhesive. The joints should be a maximum of 1 to 2mm.