Funcosil SNL

Funcosil SNL

Clear, hydrophobising, solvent-based impregnation on a silane/siloxane base

This product is not available to buy online. Please contact us for pricing and more information.

€ 110.39 EUR
INCL. VAT
Every effort has been made to ensure the accuracy of our digital colours and textures however due to limitations with technology, we strongly advise purchasing sample products for testing in situ prior to the full order being placed.
All prices specified on our website include VAT. Contact our team for bulk pricing and trade discounts.
No items found.

Delivery Information

Unless otherwise specified all products within Ireland should be delivered within 2-3 working days. Please contact us for delivery options outside of Ireland or if you wish to ship to Northern Ireland.

Our stock is primarily shipped by Fastway or via the pallet network depending on the total weight of the order. The delivery method will be automatically assigned and priced at checkout. All delivery prices include VAT.

Main Purpose

Coverage

Field of application

For use outdoors
  • Protection of facades against driving rain
  • Reduces susceptibility to dirt and green discolouration
  • Subsequent treatment/renewal of hydrophobic surfaces
  • Subsequent impregnation of mineral paint coatings
  • Porous, mineral building materials such as brick masonry work, sandstone/sand-lime brick, mineral renders and aerated concrete

Properties

Solvent-based
  • Improves resistance to frost and de-icing salts
  • Highly water-repellent
  • Enables water vapour diffusion
  • Outstanding penetration
  • UV-resistant
  • Alkali-resistant
  • Excellent long-term effect
  • Reduces energy loss

Product specifications

AppearanceClear, liquid

Density (20°C)Approx. 0.78 g/cm³

Flash point> 30 °C

Runout time s in DIN 2 cupApprox. 44

Active ingredientSilane/siloxane

Active ingredient content, % by massApprox. 7

Carrier materialDearomatised hydrocarbons

The stated values represent typical product characteristics and are not to be construed as binding product specifications.

Product specifications

AppearanceClear, liquid

Density (20°C)Approx. 0.78 g/cm³

Flash point> 30 °C

Runout time s in DIN 2 cupApprox. 44

Active ingredientSilane/siloxane

Active ingredient content, % by massApprox. 7

Carrier materialDearomatised hydrocarbons

The stated values represent typical product characteristics and are not to be construed as binding product specifications.

Preparation

Substrate requirements

  • The substrate must be clean, dust-free and dry.

Preparations

  • Any construction defects such as cracks, cracked joints, defective connections, rising damp and hygroscopic moisture must be remedied in advance.
  • Perform any necessary cleaning gently, e.g. by spraying with cold or warm water or by steam-cleaning; use rotec soft whirl jet technology or Remmers cleaning products (e.g. Traffic Film Remover (0671), Clean FP (0666), Clean AC (0672), Combi WR (0675)) on tough stains.

Application

Application temperature: min. 10 °C max. 25 °C
By brush / Low pressure spraying

Application requirements

  • Temperature of the material, air and substrate: from min. +10 C to max. +25 °C
  • Apply the primer abundantly by flow coating without pressure (avoid misting), so that a 30 - 50 cm long liquid film flows down the surface.

    Apply on one section at a time, moving from top to bottom, and immediately go over with a large brush.

    Repeat the application several (at least two) times (wet on damp) until no further material is absorbed by the substrate.
  • On surfaces where spray application is not possible, apply using a well-saturated brush.

Application instructions

  • Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.
  • Protect freshly treated surfaces from driving rain, wind, sunlight and condensation.
  • Remove any excess impregnation agent within 1 hour using V 101 thinner.
  • During application and drying of solvent-based impregnation agents, we recommend keeping windows and doors closed.

Working tools / cleaning

By brush / Low pressure spraying
  • Solvent-resistant, low-pressure conveying and spraying equipment, liquid pumps, paintbrush and flat brush
  • Tools must be clean and dry.
  • After use and before prolonged interruptions of work clean tools with Thinner V 101.

Storage / shelf life

Store frost-free and cool / protect for moisture / close containers
Shelf-life 24 months
  • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 24 months.
  • Use the contents of open containers as quickly as possible.

Usage

Total application/absorption rate 500 ml - 1500 ml Total / m²
  • Brick masonry work, fine-pored: at least 0.8 l/m²
    Brick masonry work, coarse-pored: at least 1.0 l/m²
    Sand-lime brick, smooth: at least 0.5 l/m²
    Sand-lime brick, cleft, bossed: at least 0.7 l/m²
    Render: at least 0.5 l/m²
    Aerated concrete: at least 1.0 l/m²
    Fibre-reinforced cement: at least 0.3 l/m²
    Modular concrete blocks: at least 1.2 l/m²
    Natural stone, fine-pored: at least 0.6 l/m²
    Natural stone, coarse-pored: at least 1.5 l/m²
  • Apply to a large enough trial surface (1-2 m²) to determine the precise amount of impregnation agent required.